YUKEN PV2R12-17-65-L-RAA-40 Double Vane Pump

Dimension H2:52.8 in; Cor - Static Load Rating:2124669 lbf; Cr - Dynamic Load Rating:1113029 lbf; Note:This product line wa; Dimension L:63.0 in; Dimension K:9.5 in; Seal Type:Aluminium Triple Lab; Bearing Number:HSM600BX; Shipping Weight:7181 lb; Dimension J2:37.0 in;

Fit:J7; Unit Body Material:Shaped steel/Groove-; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; d:30; Basic Load Rating, Static Rating(N):11300; Accessory:No Cover; Fit:J7; Unit, Type:Bearing Unit with Fr; Basic Load Rating, Dynamic Rating(N):19500;

da min:17 mm; Brand:NTN; F:18 mm; rs min:0.3 mm; B:17.5 mm; t:1.5 mm; ras max:0.3 mm; d:15 mm; Mass:0.01 kg; Precision class:P0;

Cor - Static Load Rating:178165 lbf; Dimension M :7-1/8 in; Dimension H :7-1/2 in; Support Type:Four-Bolt Plummer Bl; Bearing Type:Split Cylindrical Ex; Dimension H2:16 in; Dimension L :26-3/4 in; Dimension K :4-5/8 in; Dimension J2 :20-7/8 in; Bolt Size:4 x 1;

Cr - Dynamic Load Rating:66768 lbf; Cor - Static Load Rating:79358 lbf; Dimension H:1.7 in; Dimension D:12.0 in; Ca - Axial Load Rating:4002 lbf; Support Type:Take-Up; Shaft Size:3.25 in; Dimension U:0.2 in; Tensioning Unit Type:Push Type; Maximum Speed:2520 rpm;

Rolling Element Material:Bearing Steel; Fit:J7; Surface Treatment:No; Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Machining:No; Bearing Unit, Type:Square flange shape; Basic Load Rating, Static Rating(N):44100; Bearing Unit, Type:Square flange shape; Unit, Type:Insert Beari

G2 - Heat Generation Factor (Rib-Roller End):10.9; Cg - Geometry Factor:0.0695; B - Cone Width:0.9688 in; Ab - Cage-Cone Frontface Clearance:0.09 in; Cage Type:Stamped Steel; Cone Part Number:25877A; Aa - Cage-Cone Backface Clearance:0.02 in; G1 - Heat Generation Factor (Roller-Raceway):26.4; C1 - D

SW:3.97 mm; S:19 mm; A2:32 mm; N:30mm; A5:29 mm; H1:100 mm; A:45 mm; Designation of housing:T307-; A1:16 mm; B:48 mm;

L:108 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:PP205-; N:11mm; A1:21.6 mm; Weight:0.29 kg; C0:7.88 kN; s1:24.2 mm; H:28.6 mm; A:31.7 mm;

Machining:Cast iron cover moun; Bearing Inner Dia. Shape:Cylindrical Bore Set; Grease Type:Standard Grease; Surface Treatment:No; Basic Load Rating, Static Rating(N):11300; Stroke:No; Rolling Element Material:Bearing Steel; Diameter series symbol:Used for Light load; Unit, Type:Insert Bearing Unit;

e:0.29; Radial clearance class:CN; k:9 mm; Y0:2.24; Dynamic load, C:2,970 kN; Max operating temperature, Tmax:200 °C; Characteristic rolling element frequency, BSF:7.41 Hz; Characteristic inner ring frequency, BPFI:11.87 Hz; Fatigue limit load, Cu:321 kN; Number of lubrication holes:3;

Support Type:Round Flange; Bearing - Housing - Seal:MSE208BXHKPS; Dimension L:5.4 in; Dimension H:2.9 in; Bearing Number:MSE208BX; Series Type:Medium Series; Shaft Size:2.5 in; Bearing Type:Split Cylindrical Ex; Bolt Size:4 x M12; Dimension P:0.6 in;

Dynamic load, C:62 kN; D:125 mm; Max operating temperature, Tmax:120 °C; Mass:1.07 kg; Long Description:70MM Bore; 125MM Out; Enclosure:2 Metal Shields; rs min:1.5 mm; Static load, C0:44 kN; Nlim (grease):5,100 rpm; Characteristic outer ring frequency, BPF0:4.1 Hz;

Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Flange Shape:Round Type; Number of Bearings:Double; Number of Bearings:Double; Shape:Flange Type; RoHS:6; Type:Bearings with Housin; Holder Surface Treatment:Black Oxide Coating; Bearing I.D. d(mm):25;

Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Width T(mm):10; Number of Bearings:Single; Holder Surface Treatment:Black Oxide Coating; Seals:DD (Contact Rubber S; Height H(mm):10 ～ 30; Bearing I.D. d(mm):3; Number of Bearings:Single; C Chamfered:Provided;