TIMKEN LM451349-90121 Tapered Roller Bearing Assemblies

SW:3.18 mm; C:17 mm; Recommended tightening torque for set screw:3.7 Nm; r:0.6; S:14.3 mm; B:34 mm; Weight:0.21 kg; D:52 mm; d:22.22 mm; T min.:-20 °C;

Y - ISO Factor9:1.71; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2090 lbf; G1 - Heat Generation Factor (Roller-Raceway):14.6; B - Cone Width:20.638 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Series:15000; B:20.638 mm; a - Effective Center Location3:-5.8 mm; Db - Cup Backface Backing

Pre Install Clearance Max:0.0055 in; Dimension A:13 in; Dimension N:3.710 in; Dimension SVV:4.62 in; Dimension E:7.79 in; Dimension F:9.76 in; Shaft Tolerance:0.0030 in; Dimension RVV:0.49 in; Shaft Size  :90 mm; Shaft Size Type:Metric;

H:89 mm; H2:51 mm; B1:43.5 mm; N2:32 mm; A5:17 mm; A:32 mm; S:17 mm; d:20 mm; Designation of bearing:EX204G2; L2:10 mm;

Max Bearing Speed:5250 rpm; Manufacturing Plant Location:Rogersville, TN; Housing Coating:Powder Coat; d:30.0000 mm; Housing Type:4 Bolt Flange; Base to Center Height:Not Applicable; Retainer Material:Polymer; Seal Type:Triple Lip; Ship Weight:3 LB; Ball Material:Steel;

J:137 mm; Weight:2.93 kg; T min.:-40 °C; S:19 mm; H2:149 mm; C:29.6 kN; H1:19 mm; L:184 mm; Designation of closed end cover:SCC208; Designation of open end cover:SCOU208-24;

SW:3.97 mm; N:35mm; A2:38 mm; N1:25 mm; L3:95 mm; A5:33.5 mm; C:43.55 kN; H2:102 mm; A:64 mm; A1:22 mm;

s1:20.6 mm; Weight:2.29 kg; d:42.86 mm; J:85 mm; Designation of housing:PG209N-; E:22 mm; S:10.2 mm; H:53.9 mm; A:54 mm; A1:33 mm;

Ab - Cage-Cone Frontface Clearance:2.3 mm; Cone Part Number:LL205449; B - Cone Width:12.700 mm; Db - Cup Backface Backing Diameter:71.12 mm; K - Factor7:1.74; Series:LL205400; Cg - Geometry Factor:0.0699; r - Cup Backface To Clear Radius2:1.52 mm; C90 - Dynamic Radial Rating (90 million revolutions)

Lubrication Groove g:12.3 mm; Angle of Chamfer r1smin:20º; Backing Shaft Diameter ds:413.0 mm; Bore d:380.000 mm; Inner-Ring Set:380ARXS2089; Lubrication Hole Diameter h:6.0 mm; Width C:300.000 mm; Dynamic Load Rating C11:10560 kN; Width B:300.000 mm; Backing Housing Diameter Ds:505.0 mm;

A:60 mm; J:171 mm; Weight:3.7 kg; Designation of bearing:UC211-35G2T04; H1:22 mm; L1:70 mm; L:219 mm; H:63.5 mm; C0:29.2 kN; d:55.56 mm;

C:17 mm; Weight:0.21 kg; S:12.7 mm; T max.:100 °C; G:M6x1; C1:3.7 mm; C0:6.8 kN; D:47 mm; m:5 mm; Recommended tightening torque for set screw:3.9 Nm;

Z:90 mm; H1:25 mm; Recommended tightening torque for set screw:16.8 Nm; B:65.1 mm; T max.:100 °C; Dz:120 mm; S:25.4 mm; s1:32.55 mm; Weight:5.21 kg; L:241 mm;

Manufacturing Plant Location:Rogersville, TN; d:50.0000 mm; Bearing Inner Ring Material:Steel; Retainer Material:Nylon; Housing Coating:Powder Coat; Ship Weight:7.3 LB; Bearing Locking Device:Eccentric Collar; Shaft Attachment (2):Eccentric Collar; Bearing Series:210 Series; Self Aligning:Self Cente

N1:31 mm; J:232 mm; H2:175 mm; Weight:9.32 kg; L:292 mm; H:88.9 mm; Designation of housing:P216-; d:80 mm; A1:51 mm; C0:54.2 kN;